1. DLLA156P905 Diesel Injector Nozzle Description

2. Payment Methods

T/T, PayPal, Alipay, WeChat

Please contact our salesmen for specific payment information.

3. Shipping Ways  

Destination in China areas: SF Express, Debon Express, the corresponding logistics company can be provided according to customer requirements in special cases.

Destinations out of China’s areas:  DHL, UPS, FedEx, TNT air, ocean or other shipping methods required by customers.

4. Lead Time 

The purchased diesel injector nozzles will be sent out within 3 – 7 working days after receiving payment（Except for special products and special cases）.

5. Logistics Time for Destination Out of China’s Areas

DHL Logistics Time:

UPS Logistics Time:   Country or Region of Departure: China’s Mainland

The logistics time is for reference only, subjects are according to the actual arrival.

6. Shipping Packing

7. Warranty Instructions

• Diesel Injector nozzle Warranty Conditions and InstructionsIt is necessary to provide pictures, videos, or test reports detected by the injector nozzle inspection equipment when the injector nozzle is abnormal during use as evidence to feed back to the salesman.

  Abnormal conditions are properly explained such as: 1.Smoke, 2. Engine shake, 3. Difficulty starting the engine, 4. Engine noise, 5. oil leakage etc.

   

  Injector nozzle Warranty Coverage

  Within 15 days after customer receives the DLLA156P905 injector nozzle if there is a performance failure and the product has no appearance damage, customer can choose to replace it or repair it;

  If the DLLA156P905 injector nozzle has performance problems during the warranty period (6-12 months), and it is confirmed that it is product’s problems after testing, you can contact our salesmen to replace the same model or a reworked product with the same performance for free;

  If the injector house has obvious scratches, it can only be repaired and it will be returned as it is if the product is confirmed to be fault-free.

   

  Injector nozzle Out of Warranty Coverage

  The warranty period has expired.

  Injector nozzle failure caused by high temperature, high pressure, humidity, rain and snow, saline-alkali land, earthquake, and used in abnormal environment.

  Injector nozzle damage caused by man-made reasons (throwing, strong magnetic field magnetization, set fire).

  Injector nozzle failure or injector damage caused by non-injector design, technology, manufacturing, quality and other issues.

  Injector nozzle failure due to system pressure exceeding system approved pressure.

  Injector nozzle failure caused by system voltage exceeding approved voltage.

  Injector nozzle failure caused by impurities (water, lead, aluminum powder, iron powder, sulfide) in the system fuel exceeding the standard requirements.

  Injector nozzle failure caused by not installing according to the tightening torque specified in the vehicle engine maintenance manual (the tightening torque is too large or too small).

  Injector nozzle failure caused by not following the installation angle specified in the injector maintenance manual.

  Injector nozzle failure caused by not following the cleaning requirements specified in the injector maintenance maintenance manual.

  Injector nozzle failure caused by failure to replace consumable parts as specified in the injector maintenance manual.

   

  8.Storage Standard

  Choose a suitable storage place

  The warehouse and cargo yard where the injector nozzles are stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acid, alkali, salt and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.

   

  Strict requirements of warehousing

  Strict inspections should be carried out when the injector nozzle s are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. Packaged nozzle s must be protected from damage.

   

  Keep the warehouse dry and preventing moisture

  The relative humidity is usually below 70% for the injector nozzle s placed in the room, and the corrosion of the injector nozzle s is significantly reduced.

  Injector nozzle s must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.

   

  Stack Properly

  After the injector nozzle is exposed to rain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the injector from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse

  If the injector nozzle package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.

  It is forbidden to leave the injector nozzle exposed in the air for a long time.

  It is forbidden to store acid, alkali, salt and other substances together with the injector nozzle .

  The unpacked diesel injector nozzle must be rust-proof during secondary storage.